$272.84 - $412.84
Vance JPL2412SB 5'' Setback Mini-Jack Plate for Gheenoe and Clamp-on Engines
$272.84 - $412.84
(31 reviews)
Write a Review
Vance JPL2412SB 5'' Setback Mini-Jack Plate for Gheenoe and Clamp-on Engines
The JPL2412SB is a miniature single-adjusting jacking plate developed for smaller tiller type outboard clamp-on style engine designs. It is capable of vertically lifting outboard 3” with an offset of 5” from transom. The engine side is 2'' higher than the transom so you can get a total of 5'' of lift if you lift the unit's adjustment to Maximum height. If you want to stay the same height when you install, simply mount the unit a little lower on your transom. The unique ability to adjust vertically sets this unit apart from other style plates. The jack plate has a footprint of 12” Wide x 8” Length with a 1-1/4” thick clamping surface for all clamp on style outboard engines. With a weight of only 13 lbs the JPL2412SB is capable of handling 0 to 40 HP motors. If your engine is the standard bolt pattern, this unit will not work for your engine.
Please contact Vance Manufacturing for help if your engine is 40 HP & below and your engine has this standard bolt pattern listed below in inches:
Please contact Vance Manufacturing for help if your engine is 40 HP & below and your engine has this standard bolt pattern listed below in inches:
- Pre-drilled holes for 1/2'' stainless hardware
- 12 7/8'' across the top two holes from center to center
- 9 7/8'' across the bottom two holes from center to center
- 8'' of vertical distance between the top holes and bottom mounting holes
The JPL2412SB is constructed of high-strength aircraft quality aluminum and non-rusting hardware consisting of stainless steel, brass, and bearing bronze. The mounting surface plate is made of space-age polymer material known as Starboard which is stronger than marine grade plywood yet will never deteriorate. Starboard will not absorb water therefore it is not subject to rupture from freezing.
Note that the jack plate sold with a 1 inch board thickness is 5 inches of setback total. If you choose the 2 or 3 inch thick boards it will change the overall setback to 6 and 7 inches respectively.
Not sure what size thickness clamping plate you need? Measure the minimum distance your outboard engine will clamp and then round up to the nearest inch so you have enough for clamping your engine onto your new Vance Mini Jack Plate. We offer these units with 1 inch, 2 inch, and 3 inch thick mounting plates.
Not sure what size Bolt Kit you need to mount your Vance mini jack plate to your boat transom? Click here to use our mini jack plate bolt kit calculator.
Not sure what a Vance mini transom plate is? Click here for more info.
Not sure which Vance Coating option to choose? Click here for more info.
0 - 40 HP Engines.
Related Products
-
-
$305.11 - $445.11
-
$305.11 - $445.11
-
$1,539.99 - $2,109.99
Reviews
-
Received but haven't mounted yet
Received on time just haven't been able to mount and test yet. Looks like exactly what I wanted. It looks very well madeI hope it works well. I will update when I run it
-
Impressive
Very well built, 100% satisfaction! Fast service.
-
Awesome Jack Plate
Truly a great product from a great American company. I ordered it and it took no time at all. It is very well made. Fits perfectly on my Briss 12 1/2 foot inflatable boat with Mercury Jet 25hp. I highly recommend Vance Manufacturing. The definitely have my business from now on. Thank you for such a great product.
-
Awesome jack plate!
This is an extremely well built jack plate. The machine work is beautiful. I placed this on a 14 aluminum jon boat that I only had a long shaft motor for. The jack plate mounted beautifully and easy. It raised the motor to the perfect position on the keel. I have to all my friends about this product. Edward Vance was extremely responsive and helped me with everything I needed. Thanks!!
-
Jack Plate for my Merc 25hp
I have to say i almost ordered the wrong item and decided to call. I got all the info i needed plus a "you do not have to purchase that part because its not needed" they could have sold me on it like most will but Edward did not. They will have my business again. I will be sure to tell my hunting buddies about their service and products. Ordered last week, got it last week and already installed.....
-
Great Product reasonable price, and quick delivery
Received Jack plate very quickly, I added it to a Xpress 1440 jon boat with a 4 stroke yamaha 20 hp, picked up a few mph while getting motor up out of water some. Product worked great, easy install. The only thing that would have made it quicker is if the plate came with a template, a simple paper template. I actually installed engine an inch higher on the plate due to the Xpress having a lip on the stern. My cavitation plate now sets even with bottom of boat. WOT rpm's are still the same as before addition of jack plate. I also ordered the transom plate to go on the upper portion of transom and used stainless carriage bolts which gave it a nice OEM look. I would have gotten a lower transom plate but due to boats design the transom brace would not allow me to use one or unless I were to install them vertically which would have them setting at an angle due to the bolt pattern on the plate. Overall its a great product and I would recommend for anyone with a jon boat.
-
Great Jack Plate
Very well made jack plate at a good cost. Install was easy. Highly recommended!
-
Excellent Product!
Well made jack plate, was really surprised at how fast it shipped. Ordered around lunch on a Thursday and received it the very next day. Couldn't be happier about the purchase!
-
Awesome mini jack plate!
Great quality construction and finish! Simple installation, very sturdy! More than happy, I will be spreading the good word!