$272.84 - $412.84
Vance JPL2412SB 5'' Setback Mini-Jack Plate for Gheenoe and Clamp-on Engines
$272.84 - $412.84
(31 reviews)
Write a Review
Vance JPL2412SB 5'' Setback Mini-Jack Plate for Gheenoe and Clamp-on Engines
The JPL2412SB is a miniature single-adjusting jacking plate developed for smaller tiller type outboard clamp-on style engine designs. It is capable of vertically lifting outboard 3” with an offset of 5” from transom. The engine side is 2'' higher than the transom so you can get a total of 5'' of lift if you lift the unit's adjustment to Maximum height. If you want to stay the same height when you install, simply mount the unit a little lower on your transom. The unique ability to adjust vertically sets this unit apart from other style plates. The jack plate has a footprint of 12” Wide x 8” Length with a 1-1/4” thick clamping surface for all clamp on style outboard engines. With a weight of only 13 lbs the JPL2412SB is capable of handling 0 to 40 HP motors. If your engine is the standard bolt pattern, this unit will not work for your engine.
Please contact Vance Manufacturing for help if your engine is 40 HP & below and your engine has this standard bolt pattern listed below in inches:
Please contact Vance Manufacturing for help if your engine is 40 HP & below and your engine has this standard bolt pattern listed below in inches:
- Pre-drilled holes for 1/2'' stainless hardware
- 12 7/8'' across the top two holes from center to center
- 9 7/8'' across the bottom two holes from center to center
- 8'' of vertical distance between the top holes and bottom mounting holes
The JPL2412SB is constructed of high-strength aircraft quality aluminum and non-rusting hardware consisting of stainless steel, brass, and bearing bronze. The mounting surface plate is made of space-age polymer material known as Starboard which is stronger than marine grade plywood yet will never deteriorate. Starboard will not absorb water therefore it is not subject to rupture from freezing.
Note that the jack plate sold with a 1 inch board thickness is 5 inches of setback total. If you choose the 2 or 3 inch thick boards it will change the overall setback to 6 and 7 inches respectively.
Not sure what size thickness clamping plate you need? Measure the minimum distance your outboard engine will clamp and then round up to the nearest inch so you have enough for clamping your engine onto your new Vance Mini Jack Plate. We offer these units with 1 inch, 2 inch, and 3 inch thick mounting plates.
Not sure what size Bolt Kit you need to mount your Vance mini jack plate to your boat transom? Click here to use our mini jack plate bolt kit calculator.
Not sure what a Vance mini transom plate is? Click here for more info.
Not sure which Vance Coating option to choose? Click here for more info.
0 - 40 HP Engines.
Related Products
-
-
$305.11 - $445.11
-
$305.11 - $445.11
-
$1,539.99 - $2,109.99
Reviews
-
Easy to install
I have a 16 ft. V hull aluminum boat with a long shaft 25hp outboard motor which is a little long for my boat. This mini- jack plate enables me to raise the motor up to about 5â€. It’s nicely made of aluminum. I had to drill holes in the boat for the bolts & nuts (not included) It’s durable.
-
Mini Jack Plate
Very well made and simple to adjust .
-
Great product
American made products is the only way to go. Thank you
-
JPL2412SB 5'' Setback Mini-Jack Plate
I bought this Jack Plate for my aluminum flat bottom to gain some extra engine height and performance for my 25 & 15 HP Mercs. This product was easy to install and is very simple to adjust the height of your engine up to 5 inches above the transom. It is very well engineered using all stainless, aluminum and brass components and its very strong. Shipping was super fast and the customer service I received was excellent. If you have questions or need additional parts, Edward and his team are eager to help quickly. I highly recommend Vance Mfg. for any Jack Plate need. Their products are very high quality and they will make sure you are satisfied with your purchase. Great company!